{"title":"Lowering Device Accessories for Arborist Rigging","description":"\u003cp\u003eLowering device accessories support safe, controlled rigging by enhancing the performance and versatility of friction and lowering systems. This range includes rigging slings, attachment straps, mounting hardware, low-friction components, and connection accessories used alongside bollards, flying capstans, and other lowering devices. Built for strength and reliability under dynamic loads, each accessory is selected for professional tree work where predictable rope handling and secure anchoring are essential. Ideal for arborists who need dependable, high-quality hardware to complement their primary lowering equipment.\u003c\/p\u003e","products":[{"product_id":"stein-top-mounting-lowering-strap-5m","title":"Top Mounting Lowering Strap 5m","description":"\u003ch1\u003eSTEIN Top Mounting Strap for RC Devices\u003c\/h1\u003e\n\n\u003cp\u003e\u003cstrong\u003eThe STEIN Top Mounting Strap for RC Devices\u003c\/strong\u003e is a practical rigging accessory designed to help \u003cstrong\u003eposition and secure your STEIN RC Device\u003c\/strong\u003e during installation. Ideal for improving setup control when mounting lowering devices, this strap helps hold the unit in place while it is being attached to the desired anchor point.\u003c\/p\u003e\n\n\u003cp\u003eSimple, effective and easy to use, it’s a useful addition for arborists looking to make \u003cstrong\u003eRC device mounting quicker, easier and more controlled\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eHelps Position Your RC Device During Setup\u003c\/h2\u003e\n\n\u003cp\u003eThis \u003cstrong\u003e5.0m webbing strap\u003c\/strong\u003e is designed to support the positioning of your RC Device while it is being fixed to the selected mounting point. This can make setup easier, especially when working with heavier rigging equipment or when mounting needs to be controlled more accurately before final attachment.\u003c\/p\u003e\n\n\u003cp\u003eBy helping hold the device in place during installation, it can make rigging preparation more efficient and reduce unnecessary handling during setup.\u003c\/p\u003e\n\n\u003ch2\u003eSimple, Durable \u0026amp; Easy to Adjust\u003c\/h2\u003e\n\n\u003cp\u003eThe strap is made from \u003cstrong\u003e25mm webbing\u003c\/strong\u003e and is fitted with a \u003cstrong\u003esimple cam adjuster\u003c\/strong\u003e, allowing for quick and straightforward positioning adjustments when mounting your device.\u003c\/p\u003e\n\n\u003cp\u003eThis keeps the setup process uncomplicated while still providing a reliable way to suspend and position the device where needed.\u003c\/p\u003e\n\n\u003ch2\u003eSupplied with Karabiner\u003c\/h2\u003e\n\n\u003cp\u003eThe STEIN Top Mounting Strap is supplied complete with a \u003cstrong\u003eSTEIN SS-1H0003 Karabiner\u003c\/strong\u003e, giving you the key connection component needed to integrate it into your RC device setup.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eTop mounting strap for STEIN RC Devices\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eHelps \u003cstrong\u003eposition and support the device during installation\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5.0m length\u003c\/strong\u003e for flexible setup\u003c\/li\u003e\n\u003cli\u003eMade from \u003cstrong\u003e25mm webbing\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eFitted with a \u003cstrong\u003esimple cam adjuster\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eHelps make mounting \u003cstrong\u003equicker and easier\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eSupplied with \u003cstrong\u003eSTEIN SS-1H0003 Karabiner\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eUseful accessory for arborist rigging setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\n\u003ctable style=\"border-collapse:collapse;width:100%;border:1px solid #ddd;\"\u003e\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\u003cth style=\"border:1px solid #ddd;text-align:left;padding:8px;\"\u003eProduct Type\u003c\/th\u003e\n\u003ctd style=\"border:1px solid #ddd;text-align:left;padding:8px;\"\u003eMounting \/ Positioning Strap\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth style=\"border:1px solid #ddd;text-align:left;padding:8px;\"\u003eCompatibility\u003c\/th\u003e\n\u003ctd style=\"border:1px solid #ddd;text-align:left;padding:8px;\"\u003eSTEIN RC Devices\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth style=\"border:1px solid #ddd;text-align:left;padding:8px;\"\u003eLength\u003c\/th\u003e\n\u003ctd style=\"border:1px solid #ddd;text-align:left;padding:8px;\"\u003e5.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth style=\"border:1px solid #ddd;text-align:left;padding:8px;\"\u003eWebbing Width\u003c\/th\u003e\n\u003ctd style=\"border:1px solid #ddd;text-align:left;padding:8px;\"\u003e25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth style=\"border:1px solid #ddd;text-align:left;padding:8px;\"\u003eAdjustment\u003c\/th\u003e\n\u003ctd style=\"border:1px solid #ddd;text-align:left;padding:8px;\"\u003eCam Adjuster\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth style=\"border:1px solid #ddd;text-align:left;padding:8px;\"\u003eIncluded\u003c\/th\u003e\n\u003ctd style=\"border:1px solid #ddd;text-align:left;padding:8px;\"\u003eSTEIN SS-1H0003 Karabiner\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eA Handy Setup Aid for RC Device Mounting\u003c\/h2\u003e\n\n\u003cp\u003eThe STEIN Top Mounting Strap is a simple but useful accessory for arborists using STEIN RC lowering devices. By making setup and positioning easier, it helps create a smoother and more controlled rigging workflow when mounting your equipment.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3\u003eWhat is this strap used for?\u003c\/h3\u003e\n\u003cp\u003eIt is used to help position and support a STEIN RC Device while it is being mounted to the desired anchor point.\u003c\/p\u003e\n\n\u003ch3\u003eHow long is the strap?\u003c\/h3\u003e\n\u003cp\u003eThe strap is \u003cstrong\u003e5.0 metres long\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eDoes it include a karabiner?\u003c\/h3\u003e\n\u003cp\u003eYes. It is supplied with a \u003cstrong\u003eSTEIN SS-1H0003 Karabiner\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWhat type of adjustment does it use?\u003c\/h3\u003e\n\u003cp\u003eIt uses a simple \u003cstrong\u003ecam adjuster\u003c\/strong\u003e for quick and easy positioning.\u003c\/p\u003e","brand":"Stein","offers":[{"title":"Default Title","offer_id":45717548040436,"sku":"SS-RCP6004","price":17.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/6603\/1348\/files\/Stein-Top-Mounting-Lowering-Strap-5m.png?v=1775043464"},{"product_id":"stein-replacement-ratchet-handle","title":"Replacement Ratchet Handle","description":"\u003ch1\u003eSTEIN 5t \/ 10t Ratchet Handle with 20cm Tail\u003c\/h1\u003e\n\n\u003cp\u003e\u003cstrong\u003eThe STEIN 5t \/ 10t Ratchet Handle with 20cm Tail\u003c\/strong\u003e is a replacement mounting component designed for securing compatible \u003cstrong\u003eSTEIN RC lowering devices\u003c\/strong\u003e during setup. Built for dependable tensioning and secure attachment, this ratchet handle is available in \u003cstrong\u003etwo versions\u003c\/strong\u003e to suit different STEIN lowering bollard models.\u003c\/p\u003e\n\n\u003cp\u003eWhether you are replacing a worn part or refreshing your rigging setup, this ratchet handle is an essential component for maintaining safe and reliable mounting of your lowering device.\u003c\/p\u003e\n\n\u003ch2\u003eChoose the Correct Ratchet Handle for Your RC Device\u003c\/h2\u003e\n\n\u003cp\u003eThis replacement ratchet handle is available in two options:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5t Ratchet Handle with 20cm Tail\u003c\/strong\u003e – fits \u003cstrong\u003eSTEIN RC2001\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10t Ratchet Handle with 20cm Tail\u003c\/strong\u003e – fits \u003cstrong\u003eSTEIN RC3001 \/ RCW3001 \/ RC3002\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eChoosing the correct version ensures compatibility with your specific STEIN lowering device and helps maintain secure, correct installation.\u003c\/p\u003e\n\n\u003ch2\u003eDesigned for Secure Device Mounting\u003c\/h2\u003e\n\n\u003cp\u003eThe ratchet handle is used as part of the mounting system that secures the lowering device to the tree or anchor point. It allows the webbing strap to be tensioned properly so the device remains firmly fixed during use.\u003c\/p\u003e\n\n\u003cp\u003eThis makes it an important replacement part for arborists carrying out regular rigging operations and maintaining their lowering equipment in working order.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplacement ratchet handle\u003c\/strong\u003e for compatible STEIN RC devices\u003c\/li\u003e\n\u003cli\u003eAvailable in \u003cstrong\u003e5t\u003c\/strong\u003e and \u003cstrong\u003e10t\u003c\/strong\u003e versions\u003c\/li\u003e\n\u003cli\u003eSupplied with \u003cstrong\u003e20cm tail\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eUsed for \u003cstrong\u003esecure mounting and strap tensioning\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eEssential replacement part for maintaining lowering device setups\u003c\/li\u003e\n\u003cli\u003eDesigned for use with selected \u003cstrong\u003eSTEIN lowering bollards\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\n\u003ctable style=\"border-collapse:collapse;width:100%;border:1px solid #ddd;\"\u003e\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\u003cth style=\"border:1px solid #ddd;padding:8px;text-align:left;\"\u003eVersion\u003c\/th\u003e\n\u003cth style=\"border:1px solid #ddd;padding:8px;text-align:left;\"\u003eCompatibility\u003c\/th\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e5t Ratchet Handle with 20cm Tail\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSTEIN RC2001\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e10t Ratchet Handle with 20cm Tail\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003eSTEIN RC3001 \/ RCW3001 \/ RC3002\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\n\u003ctable style=\"border-collapse:collapse;width:100%;border:1px solid #ddd;\"\u003e\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\u003cth style=\"border:1px solid #ddd;text-align:left;padding:8px;\"\u003eProduct Type\u003c\/th\u003e\n\u003ctd style=\"border:1px solid #ddd;text-align:left;padding:8px;\"\u003eReplacement Ratchet Handle\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth style=\"border:1px solid #ddd;text-align:left;padding:8px;\"\u003eAvailable Options\u003c\/th\u003e\n\u003ctd style=\"border:1px solid #ddd;text-align:left;padding:8px;\"\u003e5t \/ 10t\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth style=\"border:1px solid #ddd;text-align:left;padding:8px;\"\u003eTail Length\u003c\/th\u003e\n\u003ctd style=\"border:1px solid #ddd;text-align:left;padding:8px;\"\u003e20cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth style=\"border:1px solid #ddd;text-align:left;padding:8px;\"\u003ePrimary Use\u003c\/th\u003e\n\u003ctd style=\"border:1px solid #ddd;text-align:left;padding:8px;\"\u003eMounting \u0026amp; Tensioning STEIN RC Devices\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eKeep Your Lowering Device Setup Secure\u003c\/h2\u003e\n\n\u003cp\u003eThe STEIN Ratchet Handle with 20cm Tail is a simple but essential replacement part for maintaining your lowering bollard setup. If your current ratchet handle is worn, damaged or missing, this replacement helps keep your STEIN RC system secure and ready for work.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3\u003eWhich ratchet handle fits the STEIN RC2001?\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e5t Ratchet Handle with 20cm Tail\u003c\/strong\u003e fits the \u003cstrong\u003eSTEIN RC2001\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWhich models use the 10t ratchet handle?\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e10t Ratchet Handle with 20cm Tail\u003c\/strong\u003e fits the \u003cstrong\u003eSTEIN RC3001, RCW3001 and RC3002\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is the 20cm tail for?\u003c\/h3\u003e\n\u003cp\u003eThe 20cm tail forms part of the ratchet strap connection and mounting setup for the lowering device.\u003c\/p\u003e\n\n\u003ch3\u003eIs this a complete mounting strap kit?\u003c\/h3\u003e\n\u003cp\u003eNo. This is the \u003cstrong\u003eratchet handle component\u003c\/strong\u003e only, supplied with the 20cm tail.\u003c\/p\u003e","brand":"Stein","offers":[{"title":"5 ton","offer_id":45717548925172,"sku":"SS-RCP5100","price":21.25,"currency_code":"GBP","in_stock":true},{"title":"10 ton","offer_id":45717548957940,"sku":"SS-RCP5000","price":46.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/6603\/1348\/files\/STEIN_Replacement_Ratchet_Handle.jpg?v=1756820848"},{"product_id":"stein-webbing-c-w-inverted-hook-for-rc-lowering-devices","title":"RC Lowering Device Webbing c\/w Inverted Hook","description":"\u003ch1\u003eSTEIN Webbing c\/w Inverted Hook for RC Devices\u003c\/h1\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eSTEIN Webbing c\/w Inverted Hook for RC Devices\u003c\/strong\u003e is a durable replacement securing strap designed for compatible \u003cstrong\u003eSTEIN RC lowering devices\u003c\/strong\u003e. Built for professional arborists, tree surgeons and rigging teams, this heavy-duty webbing helps secure your lowering bollard correctly during setup and use.\u003c\/p\u003e\n\n\u003cp\u003eDesigned for demanding tree work and rigging applications, this \u003cstrong\u003eSTEIN lowering device webbing strap\u003c\/strong\u003e is an essential replacement part for keeping your RC device mounted securely to the tree. Whether you are replacing worn webbing or keeping a spare in your rigging kit, it is a practical addition for maintaining reliable performance on site.\u003c\/p\u003e\n\n\u003cp\u003eAvailable in multiple lengths to suit specific \u003cstrong\u003eSTEIN RC bollard models\u003c\/strong\u003e, each option is matched to the correct device for a confident fit and straightforward setup.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eReplacement webbing strap for compatible STEIN RC lowering devices\u003c\/li\u003e\n  \u003cli\u003eSupplied with inverted hook for secure attachment\u003c\/li\u003e\n  \u003cli\u003eHelps mount and secure your RC device correctly during use\u003c\/li\u003e\n  \u003cli\u003eStrong, practical and easy to handle on site\u003c\/li\u003e\n  \u003cli\u003eIdeal for arborist rigging, dismantles and controlled lowering work\u003c\/li\u003e\n  \u003cli\u003eAvailable in multiple lengths for different RC device models\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatibility Guide\u003c\/h2\u003e\n\u003cp\u003ePlease select the correct length for your lowering device:\u003c\/p\u003e\n\n\u003ctable style=\"width:100%; border-collapse:collapse; border:1px solid #ddd; text-align:left; font-size:14px;\"\u003e\n  \u003ctr\u003e\n    \u003cth style=\"border:1px solid #ddd; padding:10px; text-align:left;\"\u003eWebbing Length\u003c\/th\u003e\n    \u003cth style=\"border:1px solid #ddd; padding:10px; text-align:left;\"\u003eCompatible Models\u003c\/th\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"border:1px solid #ddd; padding:10px; text-align:left;\"\u003e4.8m\u003c\/td\u003e\n    \u003ctd style=\"border:1px solid #ddd; padding:10px; text-align:left;\"\u003eSTEIN RC2001\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"border:1px solid #ddd; padding:10px; text-align:left;\"\u003e5.8m\u003c\/td\u003e\n    \u003ctd style=\"border:1px solid #ddd; padding:10px; text-align:left;\"\u003eSTEIN RC3001 \/ RCW3001 \/ RC3002\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"border:1px solid #ddd; padding:10px; text-align:left;\"\u003e7.8m\u003c\/td\u003e\n    \u003ctd style=\"border:1px solid #ddd; padding:10px; text-align:left;\"\u003eSTEIN RC3001 \/ RCW3001 \/ RC3002\u003c\/td\u003e\n  \u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhy Replace Your RC Device Webbing?\u003c\/h2\u003e\n\u003cp\u003eYour lowering device webbing plays an important role in helping secure the unit to the tree during rigging operations. Replacing worn, tired or damaged webbing helps maintain proper setup, improves confidence on site and keeps your lowering system working as intended.\u003c\/p\u003e\n\n\u003cp\u003eThis replacement webbing is ideal for arborists who want a simple, dependable way to keep their \u003cstrong\u003eSTEIN RC lowering bollard\u003c\/strong\u003e setup in top working order.\u003c\/p\u003e\n\n\u003ch2\u003eIdeal For\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eProfessional arborists and tree surgeons\u003c\/li\u003e\n  \u003cli\u003eRigging and dismantling work\u003c\/li\u003e\n  \u003cli\u003eReplacing worn or damaged RC device webbing\u003c\/li\u003e\n  \u003cli\u003eKeeping spare lowering device parts in your kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat’s Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x STEIN Webbing c\/w Inverted Hook for RC Devices\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eImportant Fitment Note\u003c\/h2\u003e\n\u003cp\u003ePlease make sure you select the correct webbing length for your specific RC device model before ordering. If you are unsure which version you need, contact the Gustharts team and we will help point you in the right direction.\u003c\/p\u003e","brand":"Stein","offers":[{"title":"4.8M","offer_id":45717549940980,"sku":"SS-RCP5101","price":21.25,"currency_code":"GBP","in_stock":true},{"title":"5.8M","offer_id":45717549973748,"sku":"SS-RCP5001","price":29.75,"currency_code":"GBP","in_stock":true},{"title":"7.8M","offer_id":45717550006516,"sku":"SS-RCP5002","price":38.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/6603\/1348\/files\/1506419482-58219000.png?v=1756820849"},{"product_id":"stein-rc-replacement-protection-rubbers","title":"RC Replacement Protection Rubbers","description":"\u003ch1\u003eSTEIN Replacement Protection Rubbers for RC Lowering Devices\u003c\/h1\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eSTEIN Replacement Protection Rubbers for RC Lowering Devices\u003c\/strong\u003e are a practical maintenance part designed to help keep your \u003cstrong\u003eSTEIN RC2001, RC3001 and RCW3001\u003c\/strong\u003e working smoothly and securely. Built to replace worn or damaged original rubbers, these components help protect your lowering device during regular arborist rigging use.\u003c\/p\u003e\n\n\u003cp\u003eIdeal for professional arborists, tree surgeons and rigging crews, these \u003cstrong\u003eSTEIN RC lowering device replacement rubbers\u003c\/strong\u003e help reduce wear on key contact points while supporting smooth operation and improved long-term durability. If your current rubbers are showing signs of wear, replacing them is a simple way to keep your equipment performing properly on site.\u003c\/p\u003e\n\n\u003cp\u003eDesigned specifically for compatible \u003cstrong\u003eSTEIN lowering bollard and RC rigging devices\u003c\/strong\u003e, this replacement set is an easy maintenance upgrade that helps extend the working life of your equipment.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eReplacement protection rubbers for compatible STEIN RC lowering devices\u003c\/li\u003e\n  \u003cli\u003eDesigned to fit RC2001, RC3001 and RCW3001 models\u003c\/li\u003e\n  \u003cli\u003eHelps reduce wear on contact and moving areas\u003c\/li\u003e\n  \u003cli\u003eSupports smoother operation during use\u003c\/li\u003e\n  \u003cli\u003eHelps protect internal areas from everyday dust and debris exposure\u003c\/li\u003e\n  \u003cli\u003eSimple maintenance part for extending equipment lifespan\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThese replacement protection rubbers are designed for the following STEIN lowering devices:\u003c\/p\u003e\n\n\u003ctable style=\"width:100%; border-collapse:collapse; border:1px solid #ddd; text-align:left; font-size:14px;\"\u003e\n  \u003ctr\u003e\n    \u003cth style=\"border:1px solid #ddd; padding:10px; text-align:left;\"\u003eCompatible Models\u003c\/th\u003e\n    \u003cth style=\"border:1px solid #ddd; padding:10px; text-align:left;\"\u003eUse\u003c\/th\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"border:1px solid #ddd; padding:10px; text-align:left;\"\u003eSTEIN RC2001\u003c\/td\u003e\n    \u003ctd style=\"border:1px solid #ddd; padding:10px; text-align:left;\"\u003eReplacement protection rubbers\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"border:1px solid #ddd; padding:10px; text-align:left;\"\u003eSTEIN RC3001\u003c\/td\u003e\n    \u003ctd style=\"border:1px solid #ddd; padding:10px; text-align:left;\"\u003eReplacement protection rubbers\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"border:1px solid #ddd; padding:10px; text-align:left;\"\u003eSTEIN RCW3001\u003c\/td\u003e\n    \u003ctd style=\"border:1px solid #ddd; padding:10px; text-align:left;\"\u003eReplacement protection rubbers\u003c\/td\u003e\n  \u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhy Replace Protection Rubbers?\u003c\/h2\u003e\n\u003cp\u003eOver time, regular use, exposure to debris and repeated loading can wear down protective rubber components on your lowering device. Replacing them helps maintain smoother contact between parts, reduces unnecessary wear and supports consistent performance during rigging and dismantling work.\u003c\/p\u003e\n\n\u003cp\u003eThese replacement rubbers also help provide an extra barrier against dust and debris, helping keep your device in better working condition between jobs.\u003c\/p\u003e\n\n\u003ch2\u003eIdeal For\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eProfessional arborists and tree surgeons\u003c\/li\u003e\n  \u003cli\u003eRoutine rigging equipment maintenance\u003c\/li\u003e\n  \u003cli\u003eReplacing worn or damaged RC device protection parts\u003c\/li\u003e\n  \u003cli\u003eKeeping lowering devices site-ready and working smoothly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat’s Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003ePack of replacement protection rubbers for compatible STEIN RC lowering devices\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eImportant Note\u003c\/h2\u003e\n\u003cp\u003ePlease check your model before ordering. These replacement rubbers are designed specifically for use with the \u003cstrong\u003eSTEIN RC2001, RC3001 and RCW3001\u003c\/strong\u003e.\u003c\/p\u003e","brand":"Stein","offers":[{"title":"RC2001","offer_id":45717550432500,"sku":"SS-RCP5005","price":29.75,"currency_code":"GBP","in_stock":true},{"title":"RC3001 \u0026 RCW3001","offer_id":45717550465268,"sku":"SS-RCP5006","price":51.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/6603\/1348\/files\/Stein-RC-Replacement-Protection-Rubbers.jpg?v=1756820890"},{"product_id":"arbpro-ld-winch-locking-pins","title":"LD Winch Locking Pins","description":"\u003ch1\u003eArbPro LD Winch Locking Pins – Replacement Locking Pins for LD Rigging Systems\u003c\/h1\u003e\n\n\u003cp\u003eThe ArbPro LD Winch Locking Pins are genuine replacement components designed for use with ArbPro LD rigging and lowering systems. Engineered for secure attachment and dependable operation, these locking pins help ensure safe and efficient winch mounting during arborist rigging, lifting and lowering tasks.\u003c\/p\u003e\n\n\u003cp\u003eBuilt for professional tree work environments, the locking pins provide reliable retention and straightforward installation when replacing worn or damaged original components.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eGenuine ArbPro replacement locking pins\u003c\/li\u003e\n  \u003cli\u003eDesigned for ArbPro LD winch and rigging systems\u003c\/li\u003e\n  \u003cli\u003eProvides secure mounting and retention\u003c\/li\u003e\n  \u003cli\u003eSuitable for professional arborist rigging operations\u003c\/li\u003e\n  \u003cli\u003eDurable construction for demanding outdoor use\u003c\/li\u003e\n  \u003cli\u003eQuick and straightforward installation\u003c\/li\u003e\n  \u003cli\u003eIdeal replacement for worn or damaged pins\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eReliable Winch Retention\u003c\/h2\u003e\n\u003cp\u003eThese locking pins are designed to securely hold the winch assembly in position during lifting and lowering operations, helping maintain safe rigging performance.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt for Professional Arborists\u003c\/h2\u003e\n\u003cp\u003eSuitable for demanding tree rigging environments, the pins are engineered for regular professional use in arboriculture and forestry applications.\u003c\/p\u003e\n\n\u003ch2\u003eCompatible with ArbPro Systems\u003c\/h2\u003e\n\u003cp\u003eDesigned specifically for ArbPro LD rigging devices and compatible winch mounting systems for correct fit and reliable operation.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse; border:1px solid #ddd; text-align:left; font-size:14px;\"\u003e\n  \u003ctr\u003e\n    \u003cth style=\"border:1px solid #ddd; padding:10px;\"\u003eSpecification\u003c\/th\u003e\n    \u003cth style=\"border:1px solid #ddd; padding:10px;\"\u003eDetails\u003c\/th\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"border:1px solid #ddd; padding:10px;\"\u003eProduct Name\u003c\/td\u003e\n    \u003ctd style=\"border:1px solid #ddd; padding:10px;\"\u003eArbPro LD Winch Locking Pins\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"border:1px solid #ddd; padding:10px;\"\u003eApplication\u003c\/td\u003e\n    \u003ctd style=\"border:1px solid #ddd; padding:10px;\"\u003eLD rigging and winch systems\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"border:1px solid #ddd; padding:10px;\"\u003eUse\u003c\/td\u003e\n    \u003ctd style=\"border:1px solid #ddd; padding:10px;\"\u003eWinch retention and mounting\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"border:1px solid #ddd; padding:10px;\"\u003eSuitable For\u003c\/td\u003e\n    \u003ctd style=\"border:1px solid #ddd; padding:10px;\"\u003eProfessional arborist rigging operations\u003c\/td\u003e\n  \u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eIdeal For\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eProfessional arborists and rigging teams\u003c\/li\u003e\n  \u003cli\u003eTree dismantling and lowering operations\u003c\/li\u003e\n  \u003cli\u003eArbPro LD rigging system maintenance\u003c\/li\u003e\n  \u003cli\u003eReplacing worn or damaged locking pins\u003c\/li\u003e\n  \u003cli\u003eForestry and specialist rigging work\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eExplore More\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"\/en-us\/collections\/lowering-rigging\"\u003eLowering \u0026amp; Rigging Equipment\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/en-us\/collections\/climbing-equipment-main-menu\"\u003eClimbing Equipment\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/en-us\/collections\/arbpro\"\u003eArbPro Equipment\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/en-us\/collections\/rigging-ropes\"\u003eRigging Ropes\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/en-us\/blogs\/news\/how-to-choose-the-right-guide-and-chain\"\u003eProfessional Arborist Guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBest For\u003c\/h2\u003e\n\u003cp\u003eThe ArbPro LD Winch Locking Pins are best for arborists maintaining or servicing ArbPro LD lowering and rigging systems.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose Genuine ArbPro Locking Pins?\u003c\/h2\u003e\n\u003cp\u003eUsing genuine ArbPro replacement parts helps maintain correct fit, reliable operation and safe performance during professional rigging work.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eProduct reference:\u003c\/strong\u003e Arbpro AP-LDPINS\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePrice:\u003c\/strong\u003e Approx. £11.25 ex VAT from Gustharts. :contentReference[oaicite:0]{index=0}\u003c\/p\u003e","brand":"Arbpro","offers":[{"title":"Default Title","offer_id":45719101866228,"sku":"AP-LDPINS","price":11.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/6603\/1348\/files\/ld-winch-locking-pins-product-image-black-plastic-handle-metal-post.jpg?v=1756821241"},{"product_id":"stein-smb1000-replacement-ratchet-strap","title":"SMB1000 Replacement Ratchet Strap","description":"\u003ch1\u003eSTEIN Replacement Ratchet Strap Set for SMB1000 Lowering Bollard\u003c\/h1\u003e\n\n\u003cp\u003e\u003cstrong\u003eThe STEIN Replacement Ratchet Strap Set for the SMB1000 Lowering Bollard\u003c\/strong\u003e is a heavy-duty replacement mounting strap system designed to securely fasten your lowering bollard to the tree during rigging operations. Built for strength, durability and dependable field performance, this strap set is an essential replacement part for maintaining safe and effective use of your \u003cstrong\u003eSTEIN SMB1000 Lowering Bollard\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cp\u003eDesigned specifically for arborist rigging applications, it combines \u003cstrong\u003ehigh-strength polyester webbing\u003c\/strong\u003e, \u003cstrong\u003ecarbon steel hooks with keeper pins\u003c\/strong\u003e and a compliant \u003cstrong\u003eratchet buckle system\u003c\/strong\u003e for reliable mounting and secure tensioning.\u003c\/p\u003e\n\n\u003ch2\u003ePurpose-Built for the STEIN SMB1000 Lowering Bollard\u003c\/h2\u003e\n\n\u003cp\u003eThis replacement strap set is designed to fit the \u003cstrong\u003eSTEIN SMB1000 Lowering Bollard\u003c\/strong\u003e, allowing the device to be mounted securely to the tree during use.\u003c\/p\u003e\n\n\u003cp\u003eThe complete system provides a combined usable length of approximately \u003cstrong\u003e5.0m\u003c\/strong\u003e when used with the ratchet handle, and can be fitted to trees with a diameter of up to \u003cstrong\u003e145cm\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eSecure Carbon Steel Hook Attachment\u003c\/h2\u003e\n\n\u003cp\u003eThe strap set is fitted with \u003cstrong\u003ecarbon steel hooks\u003c\/strong\u003e featuring \u003cstrong\u003ekeeper pins\u003c\/strong\u003e, which help prevent the mounting hooks from detaching from the device when not under tension.\u003c\/p\u003e\n\n\u003cp\u003eThis improves handling during installation and helps keep the system better controlled during setup and removal.\u003c\/p\u003e\n\n\u003ch2\u003eHeavy-Duty UV Resistant Webbing\u003c\/h2\u003e\n\n\u003cp\u003eThe webbing is manufactured from \u003cstrong\u003ehigh-tenacity 50mm wide polyester yarn\u003c\/strong\u003e, giving it the durability and strength needed for repeated use in demanding arborist environments.\u003c\/p\u003e\n\n\u003cp\u003eKey benefits include:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV resistance\u003c\/strong\u003e for improved durability outdoors\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e6000kg breaking strength\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eStrong and stable mounting performance for lowering device attachment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompliant Ratchet System with Full Traceability\u003c\/h2\u003e\n\n\u003cp\u003eThe ratchet mechanism meets the requirements of \u003cstrong\u003eEuropean Load Restraint Legislation Standard EN12195-2:2001\u003c\/strong\u003e, which requires the buckle to have a \u003cstrong\u003elashing capacity (LC) of 1000daN\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cp\u003eThis capacity is \u003cstrong\u003estamped directly onto the ratchet\u003c\/strong\u003e, along with a label for \u003cstrong\u003efull traceability\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cp\u003eThe buckle also displays a \u003cstrong\u003ebreaking strength (BS) of 2000kg\u003c\/strong\u003e, indicating the maximum load that can be applied to the buckle before failure.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplacement ratchet strap set\u003c\/strong\u003e for the STEIN SMB1000 Lowering Bollard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4.65m strap length\u003c\/strong\u003e \/ approx. \u003cstrong\u003e5.0m combined\u003c\/strong\u003e with ratchet handle\u003c\/li\u003e\n\u003cli\u003eFits trees up to \u003cstrong\u003e145cm diameter\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eFitted with \u003cstrong\u003ecarbon steel hooks\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeeper pins\u003c\/strong\u003e help prevent hook detachment\u003c\/li\u003e\n\u003cli\u003eMade from \u003cstrong\u003e50mm high-tenacity polyester webbing\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV resistant\u003c\/strong\u003e for outdoor use\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e6000kg webbing breaking strength\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eRatchet compliant with \u003cstrong\u003eEN12195-2:2001\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1000daN lashing capacity\u003c\/strong\u003e stamped on ratchet\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e2000kg buckle breaking strength\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eTraceable and built for dependable rigging equipment mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\n\u003ctable style=\"border-collapse:collapse;width:100%;border:1px solid #ddd;\"\u003e\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\u003cth style=\"border:1px solid #ddd;text-align:left;padding:8px;\"\u003eProduct Type\u003c\/th\u003e\n\u003ctd style=\"border:1px solid #ddd;text-align:left;padding:8px;\"\u003eReplacement Ratchet Strap Set\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth style=\"border:1px solid #ddd;text-align:left;padding:8px;\"\u003eCompatibility\u003c\/th\u003e\n\u003ctd style=\"border:1px solid #ddd;text-align:left;padding:8px;\"\u003eSTEIN SMB1000 Lowering Bollard\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth style=\"border:1px solid #ddd;text-align:left;padding:8px;\"\u003eStrap Length\u003c\/th\u003e\n\u003ctd style=\"border:1px solid #ddd;text-align:left;padding:8px;\"\u003e4.65m\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth style=\"border:1px solid #ddd;text-align:left;padding:8px;\"\u003eCombined Length with Ratchet Handle\u003c\/th\u003e\n\u003ctd style=\"border:1px solid #ddd;text-align:left;padding:8px;\"\u003eApprox. 5.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth style=\"border:1px solid #ddd;text-align:left;padding:8px;\"\u003eMaximum Tree Diameter\u003c\/th\u003e\n\u003ctd style=\"border:1px solid #ddd;text-align:left;padding:8px;\"\u003e145cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth style=\"border:1px solid #ddd;text-align:left;padding:8px;\"\u003eWebbing Width\u003c\/th\u003e\n\u003ctd style=\"border:1px solid #ddd;text-align:left;padding:8px;\"\u003e50mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth style=\"border:1px solid #ddd;text-align:left;padding:8px;\"\u003eWebbing Material\u003c\/th\u003e\n\u003ctd style=\"border:1px solid #ddd;text-align:left;padding:8px;\"\u003eHigh-Tenacity Polyester Yarn\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth style=\"border:1px solid #ddd;text-align:left;padding:8px;\"\u003eWebbing Breaking Strength\u003c\/th\u003e\n\u003ctd style=\"border:1px solid #ddd;text-align:left;padding:8px;\"\u003e6000kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth style=\"border:1px solid #ddd;text-align:left;padding:8px;\"\u003eHook Material\u003c\/th\u003e\n\u003ctd style=\"border:1px solid #ddd;text-align:left;padding:8px;\"\u003eCarbon Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth style=\"border:1px solid #ddd;text-align:left;padding:8px;\"\u003eRatchet Standard\u003c\/th\u003e\n\u003ctd style=\"border:1px solid #ddd;text-align:left;padding:8px;\"\u003eEN12195-2:2001\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth style=\"border:1px solid #ddd;text-align:left;padding:8px;\"\u003eLashing Capacity (LC)\u003c\/th\u003e\n\u003ctd style=\"border:1px solid #ddd;text-align:left;padding:8px;\"\u003e1000daN\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth style=\"border:1px solid #ddd;text-align:left;padding:8px;\"\u003eBuckle Breaking Strength (BS)\u003c\/th\u003e\n\u003ctd style=\"border:1px solid #ddd;text-align:left;padding:8px;\"\u003e2000kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eKeep Your Lowering Bollard Securely Mounted\u003c\/h2\u003e\n\n\u003cp\u003eThe STEIN Replacement Ratchet Strap Set is a dependable replacement part for keeping your SMB1000 securely mounted and ready for rigging work. Strong, traceable and built for arborist use, it’s a practical maintenance essential for professional lowering setups.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3\u003eWhat is this strap set for?\u003c\/h3\u003e\n\u003cp\u003eIt is a replacement mounting strap system for the \u003cstrong\u003eSTEIN SMB1000 Lowering Bollard\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWhat tree diameter can it fit?\u003c\/h3\u003e\n\u003cp\u003eThis strap system can fit trees up to \u003cstrong\u003e145cm in diameter\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eIs the webbing UV resistant?\u003c\/h3\u003e\n\u003cp\u003eYes. The strap is made from \u003cstrong\u003eUV resistant high-tenacity polyester webbing\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWhat standard does the ratchet comply with?\u003c\/h3\u003e\n\u003cp\u003eThe ratchet complies with \u003cstrong\u003eEN12195-2:2001\u003c\/strong\u003e.\u003c\/p\u003e","brand":"Stein","offers":[{"title":"Default Title","offer_id":45812308639988,"sku":"SS-SMB1000-RATCHET","price":25.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/6603\/1348\/files\/STEIN_SMB1000_Replacement_Ratchet_Strap.png?v=1748878017"},{"product_id":"smb1000-replacement-protection-rubbers","title":"SMB1000 Replacement Protection Rubbers","description":"\u003ch1\u003eSTEIN Replacement Tree Protection Rubbers for SMB1000 Lowering Bollard\u003c\/h1\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eSTEIN Replacement Tree Protection Rubbers for SMB1000 Lowering Bollard\u003c\/strong\u003e are genuine replacement parts designed to help protect the stem and maintain a secure fit when using your \u003cstrong\u003eSTEIN SMB1000 lowering bollard\u003c\/strong\u003e. Supplied as a complete set with fixing kit, these replacement rubbers are ideal for keeping your lowering setup in proper working order.\u003c\/p\u003e\n\n\u003cp\u003eBuilt for professional arborists, rigging teams and tree surgeons, these \u003cstrong\u003eSMB1000 replacement tree protection rubbers\u003c\/strong\u003e help reduce direct contact between the device and the tree, supporting a more stable setup while helping minimise unnecessary wear to the bark during rigging operations.\u003c\/p\u003e\n\n\u003cp\u003eIf your existing rubbers are worn, damaged or missing, this replacement set is a simple but important way to maintain the correct fit, improve setup confidence and keep your \u003cstrong\u003eSTEIN lowering bollard accessories\u003c\/strong\u003e complete and site-ready.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eReplacement tree protection rubbers for the STEIN SMB1000 Lowering Bollard\u003c\/li\u003e\n  \u003cli\u003eHelps protect the tree stem during lowering and rigging operations\u003c\/li\u003e\n  \u003cli\u003eSupports secure and stable positioning of the bollard on the tree\u003c\/li\u003e\n  \u003cli\u003eIdeal for replacing worn, damaged or missing original rubbers\u003c\/li\u003e\n  \u003cli\u003eSupplied as a complete set with fixing kit\u003c\/li\u003e\n  \u003cli\u003ePractical arborist spare part for maintaining your rigging equipment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThese replacement rubbers are designed specifically for use with the \u003cstrong\u003eSTEIN SMB1000 Lowering Bollard\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ctable style=\"width:100%; border-collapse:collapse; border:1px solid #ddd; text-align:left; font-size:14px;\"\u003e\n  \u003ctr\u003e\n    \u003cth style=\"border:1px solid #ddd; padding:10px; text-align:left;\"\u003eProduct\u003c\/th\u003e\n    \u003cth style=\"border:1px solid #ddd; padding:10px; text-align:left;\"\u003eCompatibility\u003c\/th\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"border:1px solid #ddd; padding:10px; text-align:left;\"\u003eReplacement Tree Protection Rubbers\u003c\/td\u003e\n    \u003ctd style=\"border:1px solid #ddd; padding:10px; text-align:left;\"\u003eSTEIN SMB1000 Lowering Bollard\u003c\/td\u003e\n  \u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhy Replace Tree Protection Rubbers?\u003c\/h2\u003e\n\u003cp\u003eTree protection rubbers play an important role in how your lowering bollard sits against the stem. Over time, regular use, pressure and exposure to outdoor conditions can cause them to wear down. Replacing them helps maintain proper contact, improves setup consistency and keeps your rigging equipment functioning as intended.\u003c\/p\u003e\n\n\u003cp\u003eThis is a small but worthwhile maintenance item for arborists who want to keep their lowering equipment in dependable working condition.\u003c\/p\u003e\n\n\u003ch2\u003eIdeal For\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eProfessional arborists and tree surgeons\u003c\/li\u003e\n  \u003cli\u003eRigging and dismantling operations\u003c\/li\u003e\n  \u003cli\u003eReplacing worn or damaged SMB1000 protection parts\u003c\/li\u003e\n  \u003cli\u003eRoutine maintenance of lowering bollard equipment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat’s Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eReplacement tree protection rubbers set\u003c\/li\u003e\n  \u003cli\u003eFixing kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eImportant Note\u003c\/h2\u003e\n\u003cp\u003ePlease check compatibility before ordering. These replacement parts are designed specifically for the \u003cstrong\u003eSTEIN SMB1000 Lowering Bollard\u003c\/strong\u003e.\u003c\/p\u003e","brand":"Stein","offers":[{"title":"Default Title","offer_id":57556303905142,"sku":"SS-SMB1000-RUBBERS","price":29.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/6603\/1348\/files\/Stein-SMB1000-Replacement-Protection-Rubbers.png?v=1775040216"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/6603\/1348\/collections\/ss-24ld750-c-1000.png?v=1755787019","url":"https:\/\/www.gustharts.com\/en-us\/collections\/lowering-device-accessories.oembed","provider":"Gustharts","version":"1.0","type":"link"}