Sammlung: Öle und Pflege für Handsägen

Harz lagert sich schnell auf der Schneide ab und verlangsamt den Schnitt, lange bevor die Schneide tatsächlich stumpf wird, während feuchte Lagerung oder der Einsatz im Freien bei freiliegendem Stahl Rost begünstigt. Ein spezielles Harzlösemittel entfernt diese Ablagerungen, ohne die Oberfläche zu beschädigen, und ein wenig Öl nach der Reinigung hält zwischen den Einsätzen Rost fern. Dieses Sortiment umfasst STIHL-Harzentferner, Multioils und Reinigungssprays sowie ein Mehrzweckfett für bewegliche Teile.

Fett & Schmiermittel, Kraftstoff, Öl & Mischkanister, Schleiffeilen & -steine

Harz lagert sich schnell auf der Schneide ab und verlangsamt den Schnitt ...

Read More
✔️ Von Baumpflegeexperten geschätzt
✔️ Kostenlose Lieferung ab 75 £*

Buyer's Guide

Hand Saw Oils & Maintenance Buyer's Guide

Resin buildup and rust are two different problems with two different fixes — a solvent to clear sap from a working blade, and a light oil to stop rust taking hold in storage. This guide covers both, plus greasing the moving parts a spray or oil won't reach.

Resin Buildup vs Rust: Two Different Problems

Resin and sap build up on a blade during use and slow the cut long before the edge itself is actually dull, leaving a sticky residue that grabs at wood rather than slicing through cleanly. Rust is a storage problem, not a use problem — exposed steel left damp between jobs corrodes even if the tool was clean when you put it away. They need different products: a resin solvent for buildup, a light oil for rust prevention.

Resin Removers & Cleaning Sprays

Superclean and VarioClean are both resin solvents built to cut through sap and pitch buildup without damaging the blade's finish, while Multiclean spray handles more general dirt and grime across a tool rather than targeting resin specifically. Apply, let it sit briefly to break down the buildup, then wipe clean rather than scrubbing at dried resin with the blade dry.

Oiling to Prevent Rust

A light coat of Multioil Bio after cleaning displaces moisture and leaves a thin protective film on exposed steel, which is what actually stops rust forming during storage rather than the cleaning step alone. Apply oil every time a blade goes into extended storage, not just occasionally — rust can start within days on damp steel left untreated.

Grease for Moving Parts

Pivots, springs and other moving joints need grease rather than oil, since grease stays put and keeps lubricating under repeated movement where a thin oil would work its way out. STIHL's multi-purpose grease covers these points on secateurs, loppers and similar tools — a quick application at the start of a season keeps moving parts working smoothly rather than starting to stiffen or squeak.

Vervollständigen Sie Ihr Kit