Collection: Gants anti-coupure pour tronçonneuse

Les gants anti-tronçonneuse ne nécessitent une protection anti-coupure que sur le dos de la main tenant la poignée avant — trop d’épaisseur ailleurs nuit à la maîtrise de la tronçonneuse. La certification de classe 0 garantit un matériau véritablement résistant à la chaîne là où c’est nécessaire, tandis que le reste du gant reste suffisamment fin pour offrir une réelle dextérité lors des coupes précises et de l’ébranchage. Cette gamme comprend des modèles de classe 0 et à haute dextérité d’Arbortec, STIHL, Husqvarna et Pfanner.

Pantalons de protection anti-tronçonneuse, Bottes de protection anti-tronçonneuse, Casques homologués pour l’escalade

Les gants anti-tronçonneuse ne nécessitent une protection anti-coupure q ...

Read More
✔️ Approuvé par les arboristes
✔️ Livraison gratuite dès 75 £*

Buyer's Guide

Chainsaw Gloves Buyer's Guide

Chainsaw gloves concentrate genuine Class 0 cut protection on the hand holding the front handle, staying thin everywhere else for real dexterity. This guide covers that design logic, adding arm protection, and getting the sizing right across brands.

Why Class 0 Cut Protection Is Concentrated, Not Full-Coverage

Too much cut-resistant material across a whole glove kills the dexterity you need for precise cuts and snedding, so chainsaw gloves concentrate genuine chain-resistant protection on the back of the hand holding the front handle — the point of highest realistic contact risk. Class 0 certification confirms that protection is real rather than just marketed, while the rest of the glove stays thin for control.

Adding Arm & Forearm Protection

For extra coverage beyond the hand, a chainsaw sleeve or arm protector (Pfanner Flexprotect, Arbortec Forearm Sleeve, STIHL MS Safety Arm Protectors) extends cut resistance up the forearm without needing a full protective jacket. Worth considering for tasks where the saw regularly comes close to the forearm, not just the hand.

Standard vs Hi-Vis Chainsaw Gloves

Hi-vis chainsaw gloves add visibility for roadside or low-light work without compromising the Class 0 or Class 1 protection underneath — worth the small extra cost if visibility is a genuine concern on your typical jobs, otherwise a standard colour glove performs identically for protection.

Sizing for Grip and Control

A chainsaw glove that's too loose reduces your feel for the saw's controls and can bunch inside the working area of the palm; too tight restricts blood flow over a long day. Try before buying where possible, and remember sizing runs differently between Arbortec, STIHL, Husqvarna and Pfanner — don't assume your usual size carries across brands.

Complétez votre kit