Collection: Rock Exotica LC1 인포서 로드셀 & 케이스

경험에 의존한 리깅 하중 추정은 복잡한 다지점 설치로 인해 실제 가해지는 힘을 판단하기 어려워질 때까지는 유효하지만, 위험도가 높은 해체 작업에서는 바로 그럴 때 정확한 데이터가 가장 중요합니다. 록 이그조티카(Rock Exotica)가 제작한 LC1 인포서(LC1 Enforcer)는 리깅 시스템에 인라인으로 장착되어 하중을 실시간으로 측정하므로, 추측이 아닌 안전 작업 하중 한계와 직접 비교하여 장력을 확인할 수 있습니다. 안전이 중요한 리깅 장비 분야에서 정밀함으로 인정받는 미국의 제조업체 록 이그조티카가 제작했으며, 보호용 휴대 케이스가 제공됩니다.

리깅 로프, 리깅 카라비너 및 커넥터, 아보리스트 도르래

경험에 의존한 리깅 하중 추정은 복잡한 다지점 설치로 인해 실제 가해지는 힘을 판단하기 어려워질 때까지는 유효하지만, 위험도가 높 ...

Read More
✔️ 수목 관리 전문가가 신뢰하는
✔️ £75 이상 구매 시 무료 배송*

Buyer's Guide

Rock Exotica LC1 Enforcer Load Cell Buyer's Guide

Estimating rigging loads by experience works until a complex, multi-point setup makes the actual forces hard to judge — and on a high-risk dismantle, that's exactly when precise data matters most. The LC1 Enforcer load cell measures load in real time, in-line on the rigging system, so tension can be checked directly against safe working limits rather than assumed.

What the LC1 Enforcer Measures

The Rock Exotica LC1 Enforcer measures load in real time, in-line on the rigging system itself, giving an actual force reading rather than an estimate based on experience. It's built by Rock Exotica, a US manufacturer known for precision in safety-critical rigging equipment, and comes supplied with a protective carry case.

How It Fits Into a Rigging System

The Enforcer rigs in-line between the anchor and the load, so tension can be checked directly against a device or rope's rated working load limit rather than assumed from experience. On a complex, multi-point setup where forces are genuinely hard to judge, real-time data replaces guesswork exactly when a high-risk dismantle needs it most.

Enforcer Load Cell Case

A replacement Enforcer Load Cell Case is available separately for crews who need a spare or have damaged the original — keeping the unit protected in transport and storage helps preserve its calibration accuracy over repeated use.

When to Use a Load Cell

A load cell earns its place on jobs where the margin for error is genuinely tight: heavy, multi-point negative rigging, dismantles near structures or services, or any setup where exceeding a rated working load would have serious consequences. For routine single-point lowers within familiar limits, experience and a conservative safety margin are usually enough — save the Enforcer for the jobs where precise data changes the decision you make.

키트 완성하기