STIHL Model Plate for MS 200 and MS 200 T Chainsaws - Genuine OEM Replacement

The STIHL Model Plate is a genuine OEM replacement identification plate for the STIHL MS 200 and STIHL MS 200 T chainsaws, available as two separate variants to match the correct machine designation. Part number 1129 967 1503 is the model plate for the MS 200 T (top-handle arborist saw); part number 1129 967 1504 is the model plate for the MS 200 (rear-handle saw). Built from hard-wearing materials with abrasion-resistant, legible print, each plate is designed to withstand vibration, oil, fuel, solvents and outdoor site conditions. A direct replacement for worn, damaged or missing plates, it fits the original mounting location for a clean, tidy finish. Available from Gustharts, an authorised STIHL dealer with UK stock ready to ship.

Replacing a damaged or missing model plate restores the accurate model information used in parts ordering, workshop servicing, fleet management, compliance checks, insurance records and resale documentation. As the MS 200 T is a professional top-handle arborist chainsaw widely used in UK tree surgery, accurate machine identification is particularly important during inspection and service intervals.

⚠ You must select the correct variant for your machine. The MS 200 T plate (1129 967 1503) and MS 200 plate (1129 967 1504) carry different model designations and are not interchangeable. See the variant table below and confirm your machine's model before ordering.

Key Features

• Genuine STIHL OEM replacement plate — manufactured to original specification for correct fit, finish and legibility
• Two variants available — MS 200 T (1129 967 1503) and MS 200 (1129 967 1504); select the correct plate for your machine
• Abrasion-resistant print — remains legible under oil, fuel, solvent exposure and the vibration of regular chainsaw use
• Resistant to oils, fuels, solvents and weathering — built for long service life in demanding site and workshop conditions
• Direct fit to original mounting location — matches the original fixing points for straightforward replacement
• Restores accurate model identification — supports correct parts ordering, servicing, fleet records and compliance checks
• Suited to refurbishment and inspection preparation — ideal after housing repairs, fleet service intervals or when restoring used machines

Variant Guide - Select the Correct Plate for Your Machine

Technical Specification

Important Use Guidance

Select the correct variant before ordering. The MS 200 T plate (1129 967 1503) and MS 200 plate (1129 967 1504) show different model designations. Fitting the wrong plate to your machine creates inaccurate identification records and may cause problems during servicing, parts ordering and compliance inspections.

Note for owners of the STIHL 020 T or 020. The 020 T is mechanically identical to the MS 200 T — STIHL renamed the platform when transitioning to the MS series. Ordering the MS 200 T plate (1129 967 1503) for a 020 T will result in a plate reading "MS 200 T" rather than "020 T". Whether this is appropriate depends on your workshop, fleet management or compliance requirements. If you specifically need a plate showing the original "020 T" designation, contact Gustharts before ordering.

Why Correct Model Identification Matters

A worn, missing or incorrect model plate is more than a cosmetic issue. Workshop technicians use the model plate to confirm machine identity before sourcing parts — the MS 200 and MS 200 T share many components but have differences in body configuration, bar attachment, and intended use that affect parts selection. For arborists with multiple machines in a fleet, missing or illegible plates increase the risk of misidentification, incorrect parts fitment and unnecessary downtime.

For machines used commercially, accurate model identification also supports insurance documentation, inspection records and equipment registers. Replacing a damaged or missing plate with the correct genuine OEM part — showing the verified STIHL model designation — ensures the machine can be correctly identified at every stage of its service life. STIHL manufactures genuine model plates to match the original print specification, adhesive properties and environmental resistance of the factory-fitted component.

Also Known As

The STIHL model plate is also referred to as a nameplate, identification plate, ID tag, rating plate, data label, machine label, model label and equipment tag. In workshop and trade contexts it is sometimes called a name tag or serial plate. For correct ordering, always use the specific STIHL part number for your model — 1129 967 1503 for the MS 200 T or 1129 967 1504 for the MS 200.

Often Replaced Alongside

Model plates are typically replaced during refurbishment, inspection preparation or after housing repairs. When completing this work, it is worth checking these items at the same time:

• Air filter cover for MS 200 and MS 200 T — part number 1129 140 1902; replace if cracked or damaged during housing repairs
• Air filter for MS 200 and MS 200 T — part number 1129 120 1602; inspect and replace as part of any refurbishment service
• Spark plug (NGK BPMR7A) — standard service item for the MS 200 range; replace at scheduled intervals

Explore More

• STIHL Spare Parts
• STIHL Parts Finder
• STIHL Machinery

FAQs

What is the difference between part numbers 1129 967 1503 and 1129 967 1504?

1129 967 1503 is the model plate for the MS 200 T (top-handle arborist saw). 1129 967 1504 is the model plate for the MS 200 (rear-handle saw). They show different model designations and are not interchangeable.

Which model plate do I need for my chainsaw?

If you own an MS 200 T, select part 1129 967 1503. If you own an MS 200, select part 1129 967 1504. If you are unsure, check your machine's existing documentation or contact Gustharts with your serial number for confirmation.

Will the MS 200 T plate fit a STIHL 020 T?

The 020 T and MS 200 T are mechanically identical. The MS 200 T plate (1129 967 1503) will physically fit a 020 T, but it will show the designation "MS 200 T" rather than "020 T". Consider whether this is appropriate for your fleet management or compliance records before ordering.

Why has my model plate worn or become damaged?

Model plates are exposed to constant vibration, oils, fuels and solvents during chainsaw use. Over time, the print can fade, the adhesive can fail, or the plate can be damaged during handling, housing repairs or accidental impact.

Is a missing model plate a problem for servicing?

Yes. Technicians use the model plate to confirm machine identity before sourcing parts, and a missing plate can lead to misidentification, incorrect parts selection and unnecessary delays. For commercially operated machines, it can also affect inspection and compliance records.

Do I need to confirm my model before ordering?

Yes. Always confirm your machine's model designation before selecting a variant. The two plates in this listing look similar but carry different model designations — ordering the wrong one will result in inaccurate identification of your machine.

UK Delivery

Fast, reliable delivery from our UK warehouse.

• FREE UK Standard Delivery
  applies to eligible UK orders over £75 ex VAT.
  Estimated delivery: 2–4 working days
  

• UK Standard Delivery from £3.60 + VAT
  Estimated delivery: 2–4 working days

• Next Working Day Delivery – £6.00 + VAT
  
  Order before 3:00pm (Monday–Friday) for next working day delivery
  

All UK orders are dispatched Monday–Friday and sent via a tracked courier service.